It is supplied with rated insulating voltage 550 and 800V and used for circuit of AC 50/60Hz, rated operating voltage AC 400V (or below), rated operating current up to 1600A for infrequent changing over and starting of the motors.
Haigang Cone rubber fenders are an improved version of Cell type Fender recently introduced and recommended for all type of applications including high tidal variation sites.
Easy heat dissipation,reduce the internal temperature rise.Use power isolation material to avoid electric leakage.Surge-Protected Socket-Outlet with Child Protection.
The cell can be charged at 0.2 C5A for 8h at ambient temperature of 20±5℃,then store it in the same conditions for 28 days and nights. Then discharge it at 0.2C5A to end voltage of 1.0V/cell. Its discharge duration should not be less than 4h.
We are a manufacture for hot air welders, Now we are looking for distributors all over the world. Our principle is that In each country, we only need an exclusive distributor and will try all our best to support them in order to build our long term busine
Led bulb light 100W is a high power, high brightness LED bulb light. The minimum power is 50w. At present, the high-power LED bulbs produced by our factory have two qualities.
Founded in 1932 in the United Kingdom, Perkins annual output nearly 400,000 engines.The diesel and natural gas engines are widely used in various industries due to their advantages of economy, reliability and durability.
Product name: DC to AC pure sine wave 300w inverter Model No.: NP300Working principle:Inverter is the DC power (battery, accumulator jar battery) into alternating current (usually 220v 50Hz 60Hz puresine wave). In general, an inverter is a device that con
With our good cooperation with Sany Factory, we are committed to providing customers with a comprehensive Sany genuine fuel injector. The design of SANY diesel engine injectors controls the leakage to the maximum limit, and uses high-quality raw materials
To supply power from the utility’s lines to the consumer’s weatherhead.For sevice at 600volt or less(phase to phase) at a conductor temperature of 75 maximum for PE insulation or 90 maximum for XLPE insulation.
High Current Rectifier (HCR)Mode type:KHSA-25KA12V-2Input:AC415V, 3 phase,frequency: 50HzOutput:0-25000A 0-12V▲ Adopted cophase counter parallel connection Rectification,wihich can increase the power factor and reduce power loss▲ Three-phase bridge rectif
LT STEAMER MX7,2350W powerful commercial garment steamer. This steamer equipped with our Independent R&D energy saving boiler and the power can reach 2350 watts
Nichrome 70 is a nickel-chromium alloy (NiCr alloy) for use at temperatures up to 1250℃. The alloy is characterized by high resistivity, good oxidation resistance and very good form stability. It has good ductility after use and excellent weldability.