A cylindrical magnet is a type of magnet that has a cylinder-like shape. It has a north and south pole on its ends and magnetic field lines that run parallel to the length of the cylinder. These magnets are commonly used in motors, generators, speakers, a
Nicrosil-Nisil thermocouple is the latest base metal thermocouple, developed to improve the drawbacks that type K thermocouple has. The main chemical composition of positive leg Nicrosil(NP) is Ni: Cr: Si≈84.4: 14.2: 1.4; negative leg Nisil (NN) is Ni:
A cylinder shaped magnet is a permanent magnet with a cylindrical shape. It is made from magnetic material such as neodymium, ferrite, or alnico. These magnets have a north and south pole which are located at opposite ends of the cylinder.
Brake pads are part of a disc brake system. In such a system, the brake pads are squeezed together by the caliper against the rotor disc - hence the name "disc brakes". The squeezing of the pads against the rotor creates the friction needed to bring the c
Hollow cylinder magnets are cylindrical magnets that have a hole or opening along the center axis. They are also known as tubular magnets or ring magnets. They can be made from various magnetic materials such as neodymium, ceramic, or alnico, depending on
This INNOVEVER New Pass Band filter is designed to block frequency 97MHz-517.25MHz and pass the band 0-85MHz & 550-1218MHz, with more than 40dB attenuation.
The thickness of the hot-rolled steel plate is above 3mm, and the general thickness is from 10mm to 50mm. We also provide the thickness up to 150mm. Usually the size of our stock is 1.5m*6m, 2m*8m, 2.2*12m. If you choose the size of our stocked steel plat
Mag drive coupling has magnets internal to the pump which is connected to the driving gear. The magnets can be ferrite type, sintered neodymium magnets(higher magnetic strength), and SmCo magnets(with temperature up to 350 Celsius).
In addition to the light output of Lanthanum Chloride Crystal is equivalent to that of sodium iodide crystal, other scintillation properties are better than sodium iodide crystal.
This INNOVEVER New High Pass filter is designed to block frequency 0MHz-85MHz and pass the band 102-1218MHz, with rejection more than 40dB attenuation.
5CrNiMo steel has good toughness, strength, and high wear resistance, making it a hot work mold steel.It has good toughness, strength, and high wear resistance, making it a hot work mold steel.
3Cr2W8V is a commonly used die casting mold steel. It has a low carbon content and high hardness and strength at high temperatures.It has a low carbon content to ensure the high toughness and good thermal conductivity of steel, while also containing a lar
This EP Equipment Battery Charger is made in China. Whole Aluminium body can sure very good heat radiation. This will make the charging quickly and efficiently, you never need to worry the board burning or heat protection because of bad heat radiation. Gr
According to the shape of seamless steel pipe can be divided into round pipe, square pipe, irregular pipe. Special-shaped pipe is divided into outer round and inner special-shaped seamless pipe, inner round outer special-shaped seamless steel pipe, and in
This china factory offering Charging Power Lead is made of High Quality PVC and Pure Copper. High Quality PVC cover can protect the inside cores and sure the Charge Power Lead can work normally under very high or low temperature enviroment, Pure copper co
This Emergency Stop Switch 1114-540000-00 is made of High Quality PVC with good and Pure Copper. High Quality PVC cover can protect the inside electronic parts and sure the Emergency Stop Switch can work normally under very high or low temperature envirom
Tellurium (Te), semimetallic chemical element in the oxygen group (Group 16 [VIa] of the periodic table), closely allied with the element selenium in chemical and physical properties.